中国科学院重庆绿色智能技术研究院机构知识库

The overall photoelectro-Fenton (PE-Fenton) process for water treatment with neutral initial pH includes three steps of pH reduction, PE-Fenton reaction, and pH elevation. Reaction-controlled pH adjustment (RCpA), which utilizes the intrinsic electrochemical reactions instead of chemical addition, has been employed to lower the pH, maintain the lowered pH for the Fenton reaction, and recover the pH for final effluent discharge. This study demonstrated that the overall efficiency of this sustainable PE-Fenton process was improved by rapidly recycling the iron substance. Nanosized iron oxide was prepared and employed to ensure such rapid recycling. SEM and XRD results showed that the as-prepared iron oxide was alpha-FeOOH with 20nm in size. The experimental results of dimethyl phthalate (DMP) degradation showed that diatomite-supported alpha-FeOOH (N-alpha-FeOOH/diatomite) could efficiently reduce the DMP concentration and total organic carbon. Furthermore, compared with Fe3+, the N-alpha-FeOOH/diatomite saved 160 min for iron settlement at 20 mg L-1 DMP concentration. Also, with the increment in the initial DMP concentration, extra energy consumed by the individual step of PE-Fenton reaction using the N-alpha-FeOOH/diatomite became negligible compared with that using free iron ions with the increment in the initial DMP concentration. This development is expected to be a major step of the PE-Fenton process with RCpA towards actual water treatment.