中文版 | English
CSpace
Effects of heat treatment on microstructure and mechanical properties of SLMed Sc-modified AlSi10Mg alloy
Chen, Yuming2; Wang, Linzhi1,3; Feng, Zhongxue2; Zhang, Wanneng2
2021-10-01
摘要The influence of heat treatments on the microstructures and mechanical properties of the selective laser melting manufactured AlSi10Mg alloy modified with Sc was systematically investigated. The results showed that the addition of Sc element introduced primary Al3Sc, which increased the heterogeneous nucleation during the solidification of AlSi10Mg alloy, and then the ultrafine network eutectic structure was obtained, and hence the tensile strength was improved significantly (nearly 23 %). During the heat treatment process, the network eutectic structure transformed from continuous to discontinuous, and the grain refinement was weakened with an increasing heating temperature, both of which affected the mechanical properties of the Sc modified AlSi10Mg alloy. The tensile strength decreased from 438 +/- 10 MPa for the Sc-modified alloy to 208 +/- 6 MPa, while the fracture strain significantly increased from 6 +/- 0.2 % to 30.2 +/- 1.2 % when the Sc-modified alloy was heat-treated at 325 degrees C for 12 h. It has been found that the desirable microstructure and mechanical properties of SLM Scmodified AlSi10Mg alloy can be realized by controlling the heat treatment process parameters.
关键词Selective laser melting Sc-modified aluminum alloy Mechanical properties Post-processing heat treatment
DOI10.1016/j.pnsc.2021.08.003
发表期刊PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL
ISSN1002-0071
卷号31期号:5页码:714-721
通讯作者Wang, Linzhi(wlz@cigit.ac.cn) ; Feng, Zhongxue(fzxue2003@163.com)
收录类别SCI
WOS记录号WOS:000708680300010
语种英语